Clare Announces the CPC7514Z Quad High-Voltage Isolated Analog Switch Array for Industrial Controls
Clare announced the availability of the CPC7514Z Quad High-Voltage Isolated Analog Switch Array for use in industrial controls, instrumentation, automatic test equipment and telecom applications. The CPC7514Z integrated circuit (IC) features four independently controlled, 320V bidirectional normally open (1-Form-A) relays actuated by latched TTL logic-level control signals. The monolithic silicon, which features high voltage DMOS structures and low voltage CMOS circuitry, is biased by a 3.3V power supply eliminating the requirement for external high-voltage supplies for proper operation. Switch-output to logic-input isolation is +/- 320V.
Designed to provide flexible single-ended or differential access to high voltage networks, the CPC7514Z may also be configured as two sets of matched pair switches for improved differential performance. The switch pairs have an on-resistance matching specification of 0.8 Ohm maximum over the industrial temperature range of -40 to +85 degrees Celsius.
The individual switches have active current limiting protection for fault events which limits the low frequency currents to 200mA. Under serious high power fault conditions, which may raise the IC junction temperature, a thermal shutdown protection feature is provided. Between the initial current-limit and the thermal-shutdown events, a secondary, low-level, current-limit mode is provided to limit the power dissipation of the switches. Protection continues until the fault is removed.
These products are fabricated using Clare’s High Voltage SOI process which has been used for many years in central office telecom equipment requiring long operational life. In addition to telecom, the CPC7514Z may be used as four normally open relays in automatic test equipment (ATE), industrial controls, and battery monitoring/charging equipment and instrumentation applications. The device may also interface directly with 110V(RMS) AC in switch applications replacing banks of electromechanical relays (EMR) and driver circuitry for enhanced system integration. Many applications will benefit from the elimination of a costly DC/DC converter block that is generally incorporated to bias the external EMRs.
CPC7514Z Quad High-Voltage Isolated Analog Switch Array
(Photo from Clare Website)
More information about Isolated Analog Switch Array can be found at Clare Website
<slug>Clare’s CPC7514Z Quad High-Voltage Isolated Analog Switch Array</slug>