Maxim Introduces DS1843 Fast Sample-and-Hold Circuit in a 2mm x 2mm µDFN Package

By pur, Monday, October 12th, 2009
Category: IC, Chip, SoC, Light, Optics, Measurement, Instrumentation

The DS1843 device can capture signals of less than 300ns on its differential inputs and hold them at the output for up to 100µs. A low input offset voltage (~5mV) ensures accurate measurements. The DS1843 includes a differential, high-speed, switched-capacitor input sample stage; offset-nulling circuitry; and an output buffer. Through this integration, the IC saves considerable board space as compared to discrete approaches. The DS1843 is optimized for burst-by-burst RSSI measurement in GPON OLT systems in conjunction with an external sense resistor. The DS1843 is fully specified over the -40°C to +85°C extended temperature range, and is packaged in a tiny, 2mm x 2mm, 8-pin µDFN…

DS1843
DS1843


Responses are currently closed, but you can trackback from your own site.
« Maxim Introduces MAX8834, a 1.5A White-LED (WLED) Flash Driver IC in a Tiny, 5mm² Wafer-Level Package (WLP)
Freescale Adds The MPR121 Ultra-Low-Power Capacitive Sensor and a Touch Sensing Software (TSS) Suite »

Related posts:

  1. Maxim Introduces the MAX8884Y/MAX8884Z 700mA Step-Down Converters with Dual 300mA LDOs in a 2mm x 2mm Chip Scale Package).
  2. Maxim Introduces The DS1842, a 76V APD Bias Output Stage and Current-Monitoring IC
  3. Maxim Introduces the MAX14550E, a Hi-Speed USB Analog Switch with a USB Host-Charger Identification Circuit
  4. Maxim Introduces MAX8649, 1.8A Step-Down Converter
  5. Maxim Introduces MAX8834, a 1.5A White-LED (WLED) Flash Driver IC in a Tiny, 5mm² Wafer-Level Package (WLP)
Search terms: